Finder 78.2E.1.230.2415 is a 240 W DIN rail switch mode power supply providing an adjustable 24–28 V DC output at a nominal 10 A with active PFC and a pre-warning contact for industrial automation and control applications.
£257.90
The Finder 78.2E.1.230.2415 is a high-performance 240 W switch mode power supply designed to provide reliable 24 V DC power for industrial automation, machinery and electrical control panels. As part of the Finder 78 Series, this model combines efficient power conversion, active Power Factor Correction (PFC) and comprehensive electrical protection with a useful pre-warning output contact.
Designed for demanding industrial installations, the 78.2E.1.230.2415 accepts a wide AC or DC input supply and provides a regulated nominal 24 V DC output. The output voltage can be adjusted between approximately 24–28 V DC, providing flexibility for different control systems and allowing compensation for voltage drops across connected equipment and wiring.
With a rated output power of 240 W and a nominal output current of 10 A, the Finder 78.2E.1.230.2415 provides substantial capacity for PLCs, relays, sensors, actuators and other industrial control equipment. Its two-stage architecture with active PFC, approximately 93% efficiency and integrated pre-warning contact make it particularly suitable for applications where power supply status and dependable continuous operation are important.
Switch mode power supplies such as the Finder 78.2E.1.230.2415 convert AC or DC input power into the stable low-voltage DC supply required by modern industrial automation equipment. Its regulated 24 V DC output provides dependable power for PLCs, relays, sensors, actuators and control equipment, while high conversion efficiency helps minimise electrical losses and heat generation inside control cabinets.
A key feature of the 78.2E.1.230.2415 is its pre-warning contact, which complements the LED status indication and allows power supply condition monitoring to be integrated into an industrial control system. Combined with active PFC, short-circuit protection, thermal protection and a replaceable input fuse, this makes the power supply particularly well suited to machinery and automation systems where early warning of power supply conditions can help improve system reliability.
| HS Code | 85044095 |
|---|---|
| Country of Manufacture | Italy |
| Manufacturer | Finder |
| Series | 78 Series |
| Model | 78.2E.1.230.2415 |
| Product type | Switch mode power supply |
| Rated output power | 240 W |
| Nominal output voltage | 24 V DC |
| Adjustable output voltage | 24–28 V DC |
| Nominal output current | 10 A |
| Maximum output capability | approx. 10.8 A under specified operating conditions |
| Peak output current | 25 A for 5 ms |
| Number of outputs | 1 |
| AC input voltage | 88–265 V AC |
| DC input voltage | 90–275 V DC |
| Efficiency | approx. 93% |
| Power factor correction | Active PFC |
| Status monitoring | Pre-warning LED and output contact |
| Protection rating | IP20 |
| Overload protection | Integrated |
| Overvoltage protection | Integrated |
| Short-circuit protection | Integrated |
| Thermal protection | Integrated |
| Input fuse | Replaceable |
| Electrical connection | Screw terminals |
| Mounting type | 35 mm DIN rail (EN 60715) |
| Dimensions (H × W × D) | approx. 136 × 60 × 129.3 mm |
| Operating temperature | -20 to +70 °C with derating where applicable |
The Finder 78.2E.1.230.2415 is a DIN rail switch mode power supply designed to provide reliable 24 V DC power for industrial automation, PLCs, relays, sensors, actuators and electrical control systems.
The power supply has a rated output power of 240 W with a nominal output current of 10 A. It can provide approximately 10.8 A under specified operating conditions and a peak current of up to 25 A for 5 ms.
Yes. The nominal 24 V DC output can be adjusted across a range of approximately 24–28 V DC, providing flexibility for different industrial control applications.
The pre-warning contact provides an electrical status output that can be incorporated into a control or monitoring system, complementing the power supply's LED indication and allowing developing power supply conditions to be detected remotely.
Yes. The power supply incorporates overload, overvoltage, short-circuit and thermal protection, together with a replaceable input fuse for dependable industrial operation.
The unit is designed for mounting on a standard 35 mm DIN rail to EN 60715. Its housing measures approximately 136 × 60 × 129.3 mm, providing high DC output capacity within a compact industrial control panel format.
Finder 78 Series switch mode power supplies are designed for dependable industrial DC power distribution, combining efficient power conversion, integrated electrical protection and compact DIN rail installation, with the 78.2E.1.230.2415 additionally providing pre-warning monitoring for demanding automation and machinery applications.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
● frequently asked questions
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
● latest blog
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...