Why Choose the Finder 77.H1.9.024.8250 Solid State Relay?
The Finder 77.H1.9.024.8250 is a high-performance 125 A single-phase solid state relay (SSR) designed for reliable, silent and rapid switching of AC electrical loads in industrial automation and control systems. As part of the Finder 77 Series solid state relay range, it combines semiconductor switching technology with a compact hockey puck-style housing, providing an effective alternative to conventional electromechanical relays in demanding switching applications.
This solid state relay features zero-crossing switching technology, which activates the output close to the AC voltage zero-crossing point to help reduce electrical interference and switching transients. Unlike mechanical relays, the Finder 77.H1.9.024.8250 operates without moving contacts, eliminating contact bounce and mechanical switching noise while supporting frequent switching operations and long service life.
With a 125 A rated load current, a 24–280 V AC output switching range and a 3–32 V DC control input, this relay is particularly suitable for industrial heating systems, resistive loads, lighting equipment and automated process control. Its panel-mounted construction allows installation directly onto suitable control cabinet surfaces or a correctly sized heatsink for effective thermal management.
Key Advantages
High-capacity 125 A solid state relay for industrial AC load switching.
3–32 V DC control input compatible with suitable PLC outputs and electronic control systems.
24–280 V AC switching voltage range for single-phase electrical loads.
Zero-crossing switching helps minimise electrical interference during switching.
Silent, contactless operation eliminates mechanical contact bounce and switching noise.
High switching endurance makes the relay suitable for frequently operated industrial equipment.
Compact hockey puck-style housing with protective folding screw covers.
Panel or heatsink mounting supports effective installation and thermal management.
Key Features
Finder 77 Series industrial solid state relay.
125 A rated output current.
Single-phase, normally open (1 NO / SPST-NO) output.
3–32 V DC control voltage range.
24–280 V AC load switching voltage.
Zero-crossing turn-on technology for AC load control.
2250 A maximum peak surge current for a 10 ms pulse.
47–400 Hz operating frequency range.
Contactless semiconductor switching for silent operation.
Low control power requirements for electronic automation interfaces.
Relay-style terminal arrangement with input and output connections on opposite sides.
Screw terminals with protective folding covers.
Suitable for mounting on control cabinet sheet metal or an appropriately rated heatsink.
Designed for heater control, lighting loads, solenoids and contactor driver applications.
Reliable Solid State Switching for Industrial Automation
Solid state relays such as the Finder 77.H1.9.024.8250 use electronic semiconductor components rather than mechanical contacts to switch electrical loads. When a suitable DC control signal is applied, the relay activates its AC output circuit using zero-crossing technology. This allows connected equipment to be controlled without the contact bounce, arcing and mechanical wear associated with conventional electromechanical switching devices.
The Finder 77 Series is particularly suited to industrial applications involving frequent switching cycles, including electric heating systems, process temperature regulation and automated production equipment. Its 125 A output capability supports high-current switching applications, provided that appropriate heatsinking, load derating, electrical protection and installation practices are followed. The relay is intended for AC loads and must not be used as a substitute for a safety isolation device.
Typical Applications
Industrial electric heating and temperature control systems.
Heating elements, ovens and process heaters.
PLC-controlled AC load switching.
Industrial machinery and automated production equipment.
Resistive load switching in electrical control panels.
Lighting and lamp control systems.
Solenoid and contactor coil control within suitable load ratings.
Packaging, manufacturing and process automation equipment.
Technical Specifications
Tick the specs you need, then view products that match.
Terminal Type
Screw
Mounting Type
Panel
Switching Current (A)
125 A
Manufacturer
Finder
Series
77 Series Solid State Relays
Model
77.H1.9.024.8250
Product type
Industrial solid state relay (SSR)
Relay style
Hockey puck
Switching technology
Semiconductor, zero-crossing
Number of phases
Single-phase
Output configuration
1 normally open (1 NO / SPST-NO)
Rated load current
125 A
Maximum peak surge current (10 ms)
2250 A
Rated output voltage
230 V AC
Output switching voltage range
24–280 V AC
Nominal control voltage
24 V DC
Control input voltage range
3–32 V DC
Input type
DC electronic control
Output type
AC semiconductor switching
Switch-on mode
Zero-crossing
Operating frequency
47–400 Hz
Ambient operating temperature
−30 to +80 °C
Mounting type
Panel / heatsink mounting
Terminal type
Screw terminals
Terminal arrangement
Relay-style, input and output on opposite sides
Housing
Hockey puck-style enclosure with folding screw covers
Dimensions (H × W × D)
approx. 29.4 × 45 × 59 mm
Weight
approx. 82 g
Compliance
RoHS compliant
Frequently Asked Questions
What is the Finder 77.H1.9.024.8250 used for?
The Finder 77.H1.9.024.8250 is a 125 A single-phase solid state relay used for switching AC electrical loads in industrial heating systems, machinery control, lighting equipment and automation applications.
What control voltage does the Finder 77.H1.9.024.8250 require?
The relay has a nominal 24 V DC control input and accepts a control voltage range of 3–32 V DC, making it suitable for compatible electronic controllers and PLC output circuits.
What is the maximum load current of this solid state relay?
The Finder 77.H1.9.024.8250 has a 125 A rated output current and a maximum peak surge current of 2250 A for 10 ms. The permissible continuous load current depends on the installation temperature and adequate heatsinking.
What does zero-crossing switching mean?
Zero-crossing switching means the relay activates its AC output close to the point where the supply voltage passes through zero. This helps reduce switching transients and electrical interference, making it particularly useful for resistive loads such as industrial heating elements.
How is the Finder 77.H1.9.024.8250 installed?
The relay features a hockey puck-style panel-mounting housing with screw terminals and protective folding covers. It can be mounted onto a suitable control cabinet surface or an appropriately rated heatsink. Correct thermal management is essential when switching high-current loads.
Trusted by Industrial Automation Professionals Worldwide
Finder 77 Series solid state relays provide dependable, silent and high-speed electrical switching for industrial automation, heating control and process equipment. The Finder 77.H1.9.024.8250 combines a powerful 125 A output rating, flexible DC control input and zero-crossing technology to deliver efficient contactless switching for demanding industrial applications.
Terminal Type
Screw
Mounting Type
Panel
Switching Current (A)
125 A
Manufacturer
Finder
Series
77 Series Solid State Relays
Model
77.H1.9.024.8250
Product type
Industrial solid state relay (SSR)
Relay style
Hockey puck
Switching technology
Semiconductor, zero-crossing
Number of phases
Single-phase
Output configuration
1 normally open (1 NO / SPST-NO)
Rated load current
125 A
Maximum peak surge current (10 ms)
2250 A
Rated output voltage
230 V AC
Output switching voltage range
24–280 V AC
Nominal control voltage
24 V DC
Control input voltage range
3–32 V DC
Input type
DC electronic control
Output type
AC semiconductor switching
Switch-on mode
Zero-crossing
Operating frequency
47–400 Hz
Ambient operating temperature
−30 to +80 °C
Mounting type
Panel / heatsink mounting
Terminal type
Screw terminals
Terminal arrangement
Relay-style, input and output on opposite sides
Housing
Hockey puck-style enclosure with folding screw covers
Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.
This productManufacturer Lead Time
Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options
Standard delivery
£8 ex VAT · free over £200
UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Collect from our showroom
Mon–Fri, 8am–5pm
Order and pay online, then collect from our showroom.
Please allow 15–30 minutes after ordering for us to prepare your order.
Northern Ireland, ROI & export
Priced at checkout
We deliver to Northern Ireland, the Republic of Ireland and overseas.
Delivery is calculated at checkout based on your destination.
Orders with mixed availability
Shipped complete
If part of your order is on a lead time, we hold it and send everything together.
Need the in-stock items sooner? Ask us and we can split the delivery.
Business customer returns
Returns & order support
Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.
Stocked items
Request within 30 days
Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.
Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.
Faulty or damaged items
Tell us as soon as possible
Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.
We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.
Made-to-order items
Manufacturer approval needed
Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.
This does not affect claims for faulty goods or items that do not meet the agreed specification.
Let’s get your return sorted.
Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.
The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.
● Service Agreements
Credit Accounts
Our service agreements are built to support long term procurement relationships. By working closely with engineering teams and procurement departments, we help streamline purchasing processes while ensuring consistent access to critical components and sourcing support when it matters most.
Priority sourcing and supply support
Flexible payment terms for qualifying organisations
Support for engineering, maintenance, and operations
500 +
Stock lines ready to ship
1,000 +
Same day dispatches
3500 +
Customers supported
28
Trusted Manfacturers
● frequently asked questions
Common questions about our products and support
At Led Controls Ltd we help engineers source the right automation and control gear with confidence. below are quick answers to what we are asked most often.
What product ranges do you supply
We supply all leading manfacturers in our industry. we offer next day delivery on most poplour products.
Can you help specify the correct part?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Do you have stock for urgent orders?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What are your delivery times and costs?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
What about warranties, returns and faulty items?
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
LED Controls is a specialist distributor of factory automation and industrial controls, supplying OEMs, machine builders, panel builders and end users throughout the UK and worldwide. As a trusted UK distributor for many of the world’s leading automation manufacturers, we provide industrial control products, technical expertise and bespoke automation solutions backed by outstanding customer service.
2025 has been a big year for LED Controls, and our blog has expanded accordingly. We've covered a wide range of topics across industrial control and factory automation this year. From core technology explainers and new product releases to panel building best practice...
